|
|
|
Castaway
Pourable Casting Compound
|
Landscape in Castaway.
"Paint with polymer? You sure can! Add a little oil paint to Castaway
and you have the perfect medium for painting a masterpiece that
once backed can be used in a myriad of different ways to create
unique and special works of art".
|
|
Collage
"Castaway is the perfect medium for creating unusual collages
or collage elements to use by themselves or in paper arts.
simply tint with a little oil paint, spread onto a tile, add
some texture and bake. When cool, rub on some metallic or
irridescent acrylic paint to highlight and add other design
elements as desired. "
|
Instructions
Your mould can be made from any product, even Castaway that will withstand baking at 13O°C, but is best flexible silicone 2 part mould material with curing agent. -
A light coating of release agent is recommended, e.g.. Vaseline
or similar.
Brush a coat of Castaway to fully cover the mould. Pour sufficient material to fill the mould. Place the filled mould into a pre-heated oven at 13O°C. -
Curing time should be between 20 - 30 minutes at the set temperature,
plus extra time to heat your mould i.e.. about 30 minutes for
large items of approximately 20cms and 10 minutes for smaller
models.
Please Note: Due to the variations in oven settings, a trial piece is recommended to establish the correct curing times.
Allow to cool before any attempt is made to remove your casting from the mould.
|
Contact Camartech
for your nearest distributor:
|
| Unit 6 / 40 Ricketts Road,
Mount Waverley, VIC 3149
|
| |
Telephone: |
Australia 03 9544 1518 |
|
International: +61 03 9544 1518 |
| |
Facsimile: |
Australia (03) 03 9543 8982 |
|
International: +61 03 9543 8982 |
| |
|
CONTACT US AT ANY TIME
|
|
|
